Automatic answering operation, Monitoring incoming calls, Setting the unit to answer calls – Panasonic KX-TCM943-B User Manual
Page 34: Answer set, Answer off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Automatic Answering Operation
When the unit answers a call, a greeting message is played and the
caller’s message is recorded.
•The total recording time (including the greeting message) is about
16 minutes. If messages are recorded in noisy rooms, the memory
time may be shortened up to 5 minutes.
•A maximum of 64 messages (including the greeting message) can
be recorded.
Setting the Unit to Answer Calls
Press [ANSWER ON] to turn on the answering system.
n
•The indicator lights and
“Answer set”
is
heard.
•The unit will announce the remaining
recording time if it is less than
5 minutes.
• If you hear
“Memory full”
and the
indicator flashes rapidly, erase some
or all of the messages (p. 38).
[ANSWER ON]
and Indicator
• If you do not want the unit to answer calls, press [ANSWER ON] to turn
the answering system off. The indicator light goes out and
“Answer off”
is
heard.
•You can also turn on the answering system remotely using any phone
(p. 47).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the speaker.
To monitor incoming calls with the handset, see page 50. To answer the
call with the speakerphone, press [DIGÌTÀL SPUMONE) or [REMOTE SP]
on the handset. For the handset, lift the handset off the base unit or press
[T
alk
]. The unit stops recording.
34