Erasing messages, Erasing a specific message, Erasing all of the messages – Panasonic KX-TCM943-B User Manual
Page 38: Recording a memo message, Press erase again to erase all messages, No message
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing Messages
The unit will announce the remaining recording time after playback if it is
less than 5 minutes. New messages cannot be recorded when:
—“Memory
full” is heard.
—“E2D” is displayed.
—the ANSWER ON indicator flashes rapidly.
Erase some or all of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press (ERASE] while the message you want to erase is being played.
•The unit erases the message.
•A short beep will sound and the unit will continue to play the next
message.
Erasing all of the messages
All of the recorded messages except the
greeting message can be erased at one time.
1
Press (ERASE).
• “Press ERASE again to erase
all messages."
is heard.
Within 5 seconds, press
(ERASE) again.
•A long beep and
“No message”
are heard.
•The display shows “0".
Recording a Memo Message
You may record a personal message in memory.
Press (SH
mo
).
•A long beep sounds.
1
2
38
After the beep, talk clearly about 8 inches (20 cm) away from the
MIC.
•The display shows the elapsed recording time.
When finished, press [StOP] or (MEMO).
•A beep sounds.