Panasonic KX-TCM943-B - Manual (Page 15)

Greeting message sample
“Hello, this is (your name and/or number). Sorry I cannot take your
call. Please leave a message after the beep. Thank you.”
To erase the recorded greeting message
Press (GREETING CHECK] ^ press (ERASE) while the message is being
played.
•The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message {p. 14), one of the following two
messages will be played when a call is received depending on the caller’s
recording time (p. 18).
To check the pre-recorded greeting, press [GREETING CHECK).
•A pre-recorded greeting will be played as below.
■When the recording time is set to “1 minute” or “unlimited”;
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
■When the recording time is set to “greeting only”;
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored indefinitely on a “flash memory” 1C chip—even
if a power failure occurs. All of the messages are saved until you
erase them.
15