Setting the cpc (calling party control) function, Setting the cpc, Function – Panasonic KX-TCM943-B User Manual

Page 20: Preparing the answering system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^ Preparing the Answering System

Setting the CPC

(Calling Party Control)

Function

The CPC function is preset to “A”. If you use a call waiting service, set to
“b”, or the call waiting tone will disconnect someone leaving a message.

1. Press (PROGRAM/2WAY REC].

2. Press [ SCREEN/PLAYBA^.

3. Press d].

•The current setting, “A” or “b”, is displayed on the base unit.

4. To select “b”, press

OR
To select "A”, press (T).

•The setting is displayed.

5. When finished, press [PROGRAM/2WAY RE^.