Set-up features (cont.), Picture tube (turn set off), Plastic cabinets – Panasonic CT-20G21 User Manual
Page 21: Wood cabinets, Remote control transmitter, Trilingual menu system, Care and cleaning, Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set-up Features
(cont.)
Trilingual Menu System
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
Highlight Desired
Feature When
Menu is Displayed
Displays and Exits Menus
^
^ACTION
Helpful Hints:
Language selection Menu does not affect Close
Caption transmitted information.
The Language Menu is factory set to ENGLISH. Follow
these instructions to change the Language Menu to
Spanish or French and back to English.
1
.
2
.
3.
Press the ACTION button to display the Main
Menu.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the SET-UP Icon.
Press the ACTION button to display the Set-Up
Menu.
SET-UP
4.
5.
6
.
Press the CH UP or DOWN button to highlight
“ENGLISH ESPAÑOL FRANÇAIS.”
Press the VOL LEFT or RIGHT button to select
“ENGLISH”, "ESPAÑOL” or TRANCAIS”.
Press the ACTION button twice to exit the Set-Up
Menu.
Care and Cleaning
Picture Tube (Turn set off)
Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive
moisture and wipe dry.
Plastic Cabinets
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.
Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.
Wood Cabinets
When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of
furniture polish will help preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not
place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing permanent
marring of the finish.
Remote Control Transmitter
Do not use benzene, thinners or other petroleum based cleaners to clean the Remote Control Transmitter. To clean, wipe
with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth.
Power Loss
Prolonged power interruption causes the following features to reset to their factory preset state.
FEATURE
FACTORY PRESET STATE
FEATURE
FACTORY PRESET STATE
POWER
OFF
CLOCK
NOT SET
VOLUME
APPROX.-1/3
SLEEP TIMER
NO/OFF
CHANNEL
CH03
TIMER
NO/OFF
PROGRAM MEMORY
UNPROGRAMMED
ANTENNA MODE
CABLE
VIDEO MENUS
NORMALIZED
TVA/IDEO
TV
STEREO/SAP/MONO
STEREO
TRILINGUAL MENU
ENGLISH
- 2 1 -