Panasonic CT-20G21 - Manual (Page 11)

TV/VideO Button - Press Ihe TVA/IDEO button
to select desired input
Signal connected to
TV/VIDEO
REAR VIDEO/AUDIO
INPUT 1 JACKS
TV nr CABLE
VIDEO
CH 02
Multi Button
The MULTI button can be programmed to operate up
to 6 Remote function buttons at the same time.
For Example: TV Power/On, VCR Power/On (selected
brands) can be operated at the same time with one press
of the MULTI button
Procedure
1 First program the Remote for the selected VCR
Infrared access code Confirm that Ihe Remote
Control
IS compatible with the equipment
2 Face the Remote Control transmitter away from all
equipment remote sensors
3 Press and hold down the Remote TV Power button,
then press and hold down the MULTI button at the
same time Release buttons (All previous com­
mands will be erased )
Recall Button - Press the RECALL button to
review
■ Audio Mode status
- CH number or Video Input selected
■ Sleep Timer status
■ Clock time
■ Channel Caption (Station Identifier)
fTV)
POWER
RECALL
ft
\STEREO
B '* ■' I
fVlD_EO J
CH 03
[umQ XYYZ
23 1 00
Cable Power Button - The cable power
button on the Remote Control has been designed to
operate selected brands of Cable Television Converter
boxes The proper cable television converter box
infrared code must be obtained prior to use (Please
refer to Programming the Universal Remote for
programming
instructions) The Remote Control
TV/CABLE switch should be in the CABLE position
NOTE: The CHANNEL UP and DOWN buttons on the
Remote may be used for selecling Cable Con­
verter box channels
CABLE
POWER
Located On Remote Control
UsB I d select Cable Box
Channels atlar programming
In bar ad Code
MULTI
PRESS SIMULTANEOUSLY
4 Press a maximum of 6 Function buttons on the
Remote
Each button you press is equal to one function If six
Remote button functions are entered, all will register
in the MULTI button memory in the sequence
entered When less than six Remote button
functions are entered, press the MULTI button to
end the program mode (Waiting more than 30
seconds without pressing another button will also
end the program mode )
The following is an example of Remote functions
that can be programmed into the MULTI button
-
TV Power - For turning TV ON and OFF
- VCR Power - For turning VCR ON and OFF
(selected brands after programming it's Infrared
access code, if necessary)
Both can be turned ON or OFF with one press of the
MULTI button
(TV)
POWER VCR POWER
MULTI
To delete entered functions - Repeat step 3 Now
you can enter from one to six different Remote
functions
NOTE:
You can also program the MULTI button to perform
most individual Remóle Control button functions
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc ) cannot be programmed Only those
buttons which perform a function when initially
pressed (PowerOn/Off, Mute, Direct Channel Entry,
etc ) can be programmed
- 1 1 -