Panasonic CT-20G21 - Manual (Page 17)

Timer Features
• Sleep Timer
• Program Timer
Special Feature:
Automatic turn “OFF’ after 90 minutes.
The TV has a special feature that will shut itself
OFF after 90 minutes when turned ON by the
program timer unless a function key is pressed
during the 90 minutes
This feature is useful so that the TV will not
remain ON unattended for an extended period of
time
Programming the OFF timer will also cancel the
automatic OFF feature
Sleep Timer —This feature is used for automatic
turn off in 30, 60 or 90 minutes
NOTE: Display will flash 3,2 and 1 to indicate the last
three remaining minutes prior to turn off The
Recall display will also appear
1 Press the ACTION button to display the Mam
Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Timer Icon
3 Press the ACTION button to display the Timer
Control Menu SLEEP TIMER position should
already be highlighted If not, press CH
UP/DOWN to highlight SLEEP TIMER
4 Press the VOL RIGHT button to select 30,60 or 90
minutes (Sleep Timer will be activated)
5 Press the ACTION button twice to exit the Timer
Control Menu
NOTE: To deactivate Sleep Tmer repeat steps 1
through 4 In step 4 select “NO” instead of
minutes
Helpful Hints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the time will display in the
bottom left corner
Progrsm Timer — This feature IS capable of
turning the TV on, tuned to a desired channel and off at a
predetermined time (one day or daily)
NOTE: The clock must be set for this feature to operate
(Refer to the Set-Up Menu to set time)
1 Press the ACTION button to display the Mam Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Tmer Icon
3 Press the ACTION button to display the Timer
Control Menu
4 Press the CH DOWN button to highlight “ON” (time)
5 Press the VOL LEFT or RIGHT button repeatedly to
set hours (set AM/PM accordingly)
6 Press the CH DOWN button to highlight the minutes
position
7 Press the VOL LEFT or RIGHT button repeatedly to
set minutes
8 Press the CH DOWN button to highlight “OFF”
(time)
9 Repeat steps 5 through 7 for setting “OFF” (time)
10 Press the CH DOWN button to highlight
“CHANNEL”
11 Press the VOL LEFT or RIGHT button or use the
Remote Control Keyboard to enter the channel
number desired when the set turns “ON”
12 Press the CH DOWN button to highlight “SET”
13 Press the VOL RIGHT button to select
• NO - not activated
• ONE DAY - activated
• DAILY - activated
NOTE: The Tmer light will come “ON” when Tmer is
activated (In some Models)
14 Press the ACTION button twice to exit the Tmer
Control Menu
NOTE: To deactivate Program Tmer select “NO” in step
13
Helpful Hints:
• If the Program Tmer "ON” functions while the set is
operating, the set will automatically tune to the
channel designated m the Tmer Program
- 17 -