Panasonic KX-P3124 - Manual (Page 97)

Power requirements:
Frequency:
Current:
Interface:
Print fonts:
Software Emulation:
Buffer:
Character sets:
Dot configuration:
(Continued)
Refer to the nameplate located on the rear of the printer.
Centronics parallel
RS-232C/Serial interface board [KX-PS13, KX-PS14] (option)
3 Draft (Pica, Elite, Micron)
8 Letter Quality (Courier, Prestige, Bold PS, Script, Sans Serif, Orator,
Roman, OCR-B)
1 Super Letter Quality (Roman)
6 Scalable fonts (Courier-SC, Bold PS-SC, Prestige-SC, Script-SC,
Sans Serif-SC, Roman-SC)
Epson LQ-570, IBM Proprinter X24E
52K (standard)
96 ASCII characters,
96 Italic ASCII characters,
33 International characters—14 language sets-i-Legal,
33 Italic International characters—14 language sets-i-Legal,
158 IBM-PC special characters—sets 1 &2,
38 Multilingual characters
Vi27 inch (0.2 mm) dot diameter
Draft LQ SLQ
Matrix
(Hor.xVer.) 9 x 2 4 30x24 30x48
Dot pitch
(Hor.) Vl20" 1/360" 1/360"
(0.21 mm) (0.07 mm) (0.07 mm)
(Ver.) 1/180" 1/180" 1/360"
(0.14 mm) (0.14 mm) (0.07 mm)
Maximum number Print line 8" / 9"
of characters per Pica [10 characters per inch (cpi)] 80 / 90 cpi
line (cpI): Elite (12 cpi) 96 / 108 cpi
Print line (879") Micron (15 cpi) 120/ 136 cpi
Compressed (17 cpi) 137/ 155 cpi
Elite compressed (20 cpi) 160/ 181 cpi
Pica elongated (5 cpi) 40 / 45 cpi
Elite elongated (6 cpi) 48/ 54 cpi
Micron elongated (7.5 cpi) 60/ 68 cpi
Compressed elongated (8.5 cpi) 68/ 77 cpi
Elite compressed elongated (10 cpi) 80 / 90 cpi
Printing speed Micron Elite Pica
[characters per Draft 320 cps 256 cps 213 cps
second (cps)]: LQ 106 cps 85 cps 71 cps
with black SLQ 42 cps 35 cps
97