Note – Panasonic KX-P3124 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

This printer has two paper feed mechanisms to support 4 paper paths. One mechanism is TRACTOR

mode for continuously fed paper. In the tractor mode you can choose between PUSH or PULL.

The other paper feed mechanism is FRICTION mode. In the friction mode you can feed single sheets
or envelopes through the front or top. The optional KX-PT11 Cut Sheet Feeder will accommodate
automatic feeding of single sheets, from the top paper path.

Push Tractor mode (Q PUSH)

—fanfold paper (1 part)
—multipart forms consisting of 2 parts

Pull Tractor mode (0 PULL)

—multipart forms consisting of 3

or 4 parts

—labels
—fanfold paper {1 part)

Friction mode (Q)

—single sheets

(The KX-PT11 Cut Sheet Feeder

allows you to automatically feed up

to 80 sheets of 20 lb paper.)

—envelopes

Front

feeding

Front

feeding

C/>

Note:

•For optimum print quality, do not use reverse line feeding in pull mode. If reverse feeding is

necessary in pull mode, set REV LF/PULL in the INSTALL menu to ON through the
Function mode.

•Paper Parking is not available in pull mode.
• Multipart forms consisting of 2 parts, may be used for rear feeding (PUSH mode). For 3 or

4 part forms, we recommend bottom feeding {PULL mode) for optimum print quality.

•When printing on envelopes or thick sheets, front feeding is recommended.