Panasonic KX-P3124 - Manual (Page 78)

OIO olorü
This section is for the development of programs and printer drivers and assumes the reader is
proficient in programming. More detailed information has been stored in the Command Reference
program on the Setup Disk. P. 90)
Font Selection
Function Name Parameter
Selects print quality ESC “x" n n=0: Draft
n=1; LQ
n=2: SLQ mode (Roman 5, 10, 6, and
12 CPI fonts only)
Selects print typeface ESC “k” n n=0: Roman n=4: Script
n=1: Sans Serif n=5: OCR-B
n=2: Courier n=6; Bold PS
n=3: Prestige n=7: Orator
Selects sub/superscript printing ESC "S" n n=0; Superscript
n=1: Subscript
Releases sub/superscript printing ESC “T”
Selects font by pitch and point ESC “X" m Hi
H i
0Sm^127 except 2, 3 and 4
m=0: No change to character spacing
m=
1 : Character spacing is set to PS
m>4: Sets character spacing to 360/^ cPI
(0^n,g255)cfc (0^n.si27)oEc
n.=0 n!=0: No change to point size
[Total
pOintS]=(n.+flix256^
Character Pitch Selection
Function Name Parameter
Sets pica pitch (10 cpi) printing ESC “P"
Sets elite pitch (12 cpi) printing* ESC "M"
Sets micron (15 cpi) printing ESC "g"
Sets compressed (17 cpi) printing* SI or ESC SI
Releases compressed printing DC2
Sets/Releases proportional spacing ESC “p” n n=0: Release
n=1: Set
Sets programmable pitch/highlighting ESC “!” n (0Sn^255)c*c
based on the value of n n=0; Pica n=16: Double-strike
n=1: Elite n=32: Double-width
n=2; PS n=64: Italic
n=4: Compressed
n=8: Emphasized n=128: Underlining
^When elite and compressed pitches are set simultaneously,
(up to 160 cpI for an 8" print line).
subsequent output is printed in 20 cpi
78