Panasonic KX-P3124 - Manual (Page 100)

^[pecsflOOsgiM?^
Printing Area
Fanfold paper
o
o
o
o
o
o
o
o
o
o
-Q ~
o
o
o
o
o
o
o
o
■e-
o
1st character
Printing area
Paper perforations
Printing area
Push Pull
A 1" (25.4 mm)
B 0.7" (17.8 mm)
C 0.6" (15.2 mm) 5.4" (137 mm)
D 1" (25.4 mm)
A: Value A indicates the area near the paper perforations
where the quality may not be optimum.
B; Value B indicates the minimum distance between the
sprockets and first printable character. {When the left tractor
is set on the left end and the margin is set to 0.)
C: Value C indicates the area from the top edge of the paper to
the top of the first printed character.
D: Value D indicates the position where paper out is detected
and printing may not be optimum.
Single sheet and Envelope
1 St character
Printing area
Single Sheets and Envelopes
B 1.5" (38 mm)
c
0.6" (15.2 mm)
D 1"(25.4 mm)
B: Value B indicates the minimum distance between the
edge of the paper and the first printable character. (When
the left paper guide is set to the left end and the margin is
set to 0.)
C: Value C indicates the area from the top edge of the paper
to the top of the first printed character.
D: Value D indicates the position where paper out is detected
and printing may not be optimum. (When printing on enve­
lopes do not print on area where edges overlap. Print
quality may not be optimum.)
100