Panasonic PV C2020 - Manual (Page 8)

One Time Setup
When the unit is turned on the first time, setup
mode is entered automatically.
Press POWER on
the remote or unit.
1
Œ)
2
SELECT LANGUAGE
PUSH CH A : English
OPRIMIR CH T :Espaflol
APP. VOL + : F r a n ç a i s
Select the language.
— f o f English
-Lfor Spanish
^ (Español)
—for French
_______ (Français)
• If wrong language is set, complete “Reset all unit Memory
Functions" steps page 43.
• If you use a cable box, it must be left on.
3
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR
LOCAL PBS CH THEN. , .
PLEASE PUSH CH UP KEY
Start Channel Auto Set
and Clock Auto Set.
Press CH A.
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
Process of Setup
lo Language channel Ea Clock
Case 1 ] (Setup completed)
6/7/2000 WED 12:00PH
DSTtON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
Press CH A to exit.
• If your area observes
daylight saving time,
but you would like to
turn the DST feature
off, complete the
'To Set or Reset the
Clock" step on page
41 and set DST: OFF,
If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; complete the Time
Zone Adjust steps on the next page.
Case 2 {Setup incomplete)
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACT I ON TO SET CLOCK
See Case 2
next page.
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box must be left on and
tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via AudioA/ideo Jacks, an RF coaxial cable must also be
connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.
8
For assistance, call 1-800-211-PANA(7262)