Panasonic PV C2020 - Manual (Page 14)

Timer Recording
You can set up to 8 programs to be recorded while you are away.
Q Display PROGRAM screen.
Press PROGA/CR+.
2
SET PROGRAM
VCR PIUS+ PROGRAMMING
TIMER PROGRAMMING
SELECT
SET
END
A T KEY
► KEY
PROG KEY
Select TIMER PROGRAM.
1) Press
AT
to select.
2) Press ► to
display.
If a program is already in memory,
press AV, and ► to select an
unused program number.
3
I/
START STOP CH
'№/CTN
CATEGORY:N/A
SELECT START DATE
SLP
SELECT
SET
END
A ¥ KEY
► KEY
PROG/ACTION KEY
Exampie
r
8-9" ”31— 1 —2'
Set the recording DATE.
1) Press
AT
to select.
2) Press ► or^
to set.
• 1~31 = One time
• DAILY = MON-FRI
•WEEKLY SUN-SAT
= Same time once a
week
Today’s —7 SELECT*/T Selection Order DAIL1
Date 1
WEEKLY weekly _____ weekly
J
(SAT) (MON) (SUN)
Repeat step 3 to set:
• Start
time, stop
time
• Channel (or LINE for outside source)
• Category [N/A (not applicable),
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA]
• Speed (SP, LP, SLP)
4
START STOP
7 FRI 9:00P 12:00A 08
today
CATEGORY i MOVIE
SET COMPLETED
ABC
SP
Make the notes.
(If not wanted, go to step 5.)
1 )
WISH TO MAKE NOTES;A KEY
SET ► KEY
END :PROG/ACTION KEY
Characters will change
in the following order.
A - B - C ........... 2- BLANK----------- &
2 - 1 - 0 - / - !
Press
A
to
begin.
Press
AT
to
select.
Press ► or
to set.
Press
PROGA/CR+
(or ACTION)
to end.
Continued on the next page.
2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
TIMER REC” appears and/or the PROG TIMER indicator flashes. Be sure
a casseffe with record lab is loaded and the unit is in Stop mode.
If the start times of two programs overlap, fhe lower numbered program
will have priority.
If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 13), the Timer Recording wilt not be
performed.
If there is a power interruption of more than one minute, the recording
may not be performed or continue.
If “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
□ All connections are made. (See page 7.)
O Your unit is plugged in.
O The clock is set to correct time,
n The tape is tong enough,
n The record tab is in place.
I^^Check list before you begin.
SET
SELECT
-^:CH UP
▼:CH DOWN
► :VOLUP
4 :VOL DOWN
PROGA/CR+
Timer Recording Using
unit Buttons
You can set a Timer Recording using
ACTION key on the unit. (See page 9.)
STWEJECT ft£W/« O0O0 (Z]0
11 Press STOP/EJECT and REW
together without a tape inserted to
display MAIN MENU.
^ Press AT + - to select “VCR"
and STOP/EJECT and REW together
to display SET UP VCR screen.
3 Press AT to select “TIMER
PROGRAM" and + to display the
TIMER PROGRAM screen.
4 Repeat main steps 3~6.
14
For assistance, call 1-800-211-PANA(7262)