Panasonic OMNIVISION VHS PV-V4521 - Manual (Page 9)

Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
4
Press CHA Key to start Channel/Clock
Auto Set operation. Settings are
performed automatically. If the setup is
completed, the following screen is
displayed.
r VCR rCLOCtTI S haknel
571372001 SUN 2:20PH|
DST:ON
CH 10
: CH UP KEY
If “Auto Clock Set is Incomplete"
screen appears, set the clock using
MANUAL CLOCK SET procedure shown
below.
rvCR I CLOCK I channel
PLEASE SET CLOCK BY
PRESSING ACTION KEY
Manual ClockSet
If Auto Clock Set was incomplete, manually
set the clock as follows.
1
Press ACTION Key on the Remote to
display CLOCK Menu screen.
rVCR r CLOCK 1 CHANNEL;|
SELECT MONTH
SELECT:A » SET:
EXIT ..INACTION________
2
Press
A T
to select the month and ► to
set. In the same manner, select and set
the date, year, time, and DST (daylight
saving time).
3
I VCR fCLOCin CHANNET| liKIliJiIiIUlklHI
SET COMPLETED
SET '.■* ►
START ■ACTION
Press ACTION Key twice to start CLOCK
and exit.
S CD © ©
SPEED CO
© ©
o©
AOMUT
®o
O <©^0
-M
Jp
oSHo.
Q O O 0
POWER
VCR
VCRATV
SELECT/
SET
A
iPLAY
T :STOP
◄ :REW
► :FF
ACTION
CH
A/T
Model PV-V4521 remote shown.
Reset All VCR Memory Functions
Use when moving VCR to new
location, or if a mistake was made in
the Initial Setup section.
• Make sure a tape is not inserted in
the VCR.
Press and hold both
PLAY and CHANNEL
A on the VCR for
more than 5 seconds.
• The power shuts off.
3
Do “Initial Setup” on page 8.