Weak signal display on/off feature, Vcr lock feature, Auto shut-off feature – Panasonic OMNIVISION VHS PV-V4521 User Manual
Page 23: 5ooo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

'Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
fnn
GOTUT
O'
S o © ©
S © © ®
5ooo
uecT _ _ I
O ©
DISPLAY
SELECT/
SET
ArPLAY
▼ :STOP
► :FF
^:REW
SEARCH
ACTION
RESET
COUNTER
TAPE
POSITION
Model PV-V4521 remote shown.
Weak Signal Display ON/OFF Feature
When “ON," picture is displayed regardless of signal
strength.
1
"CLQCKI CHANNëT
REPEAT flAY
AUTO SHUT-OFF ON
IDIÛMAAANOUE ; ENGLISH
VCfrS OUTPUTCH rZ
Press ACTION
to display menu.
I VCR raBCiff
PWTCH}'
Press -4
^
to select and display
CHANNEL,
press
AT
to select WEAK
SIGNAL DISPLAY,
and
press
P to set
ON or OFF.
ON:
Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
OFF: Screen turns solid blue when signal is weak
or non-existant.
Selecting ON has no effect on connected
equipment with blue back feature. ■
3
Press ACTION
to return to normal screen.
VCR Lock Feature
When set to ON, all operations except
for timer record and tape eject are
prohibited. Useful for households with
small children.
VCR LOCK
activated
VO) LOCK OFF
To turn on,
hold down REC on
the VCR in Stop
mode with no tape
inserted for 7 sec.
(Please ignore the
NO CASSETTE
warning.)
To turn off,
repeat above.
VCR Lock cancels in 24' hours if
clock is set.
REC
Auto Shut-Off Feature
When set to ON, VCR shuts off if blank tape is
played or no signal is detected for 5 min.
1
Press ACTION
to display menu.
Press
AT
to select AUTO SHUT
OFF and
press ►
to set ON or OFF.
Press ACTION
to return to normal screen.
23