Function & channel display, Blank tape/ no video signal indication, Vcr status – Panasonic OMNIVISION VHS PV-V4521 User Manual
Page 26: Clock display, To display or remove overlay at right, On-screen displays (osd), Warning and instruction displays, Press display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

On-Screen Displays (OSD)
Function & Channel Display
When a function
button is pressed, e.g.
PLAY, or you change
channels, a 4 second
display appears first
in large and then
small characters.
Blank Tape/ No Video
Signal Indication
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with the Weak Signal Display
Feature (page 23) set to OFF, the TV
screen will turn solid blue.
VCR Status &
Clock Display
To display or
remove overlay
at right,
--> press DISPLAY.
Function Status Current Time
Channel
Rec Time Remaining
(OTR mode only,
see page 13.)
Broadcast Audio
Being Received
(For Model PV-V4521 only)
-
0 :2 5
»STEREO 4
»SAP
MONO
Counter
Tape Speed
(See page 4.)
Warning and Instruction Displays
operation or provide furt^ii
ou to a missed
er instructions.
OSD
Caution
РЯ
OSD
Caution
РЯ
NO CH FOUND
PLEASE
CHECK
ANTENNA
CABLE
CONNECTION
THEN
PRESS CH UP KEY AGAIN
If no active channels
are found for
CHANNEL
MEMORY...
8
TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY
If you press POWER
or STOP during a
Timer Recording...
(visible in VCR
mode only)
14
PLEASE SET CLOCK BV
PRESSING ACTION KEY
If you attempt to set
or review a Timer
Recording and the
Clock is not set...
14
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END :PLAY
If head cleaning
becomes
necessary while
playing back a
tape...
25
TURN VCR OFF
FOR TIMER RECORDING
After a Timer
Program has
been set...
14
VCR LOCK ACTIVATED
If you press a
function button
other than STOP/
EJECT or POWER
while the VCR is in
VCR Lock mode...
23
CHECK CASSETTE
RECORD TAB
If you press REC on
the remote control or
VCR, and a cassette
is inserted with no
record tab...
4
REMOTE CONTROL IS SET
TO TV MODE
USE VCR ; VCR KEY
If you press an
invalid key on the
remote while in
TV mode...
16
22
NO CASSETTE
PLEASE INSERT A CASSETTE
If you press PLAY,
FF, REW, or REC on
the remote control or
VCR without a
cassette inserted...
12
13
26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]