Panasonic OMNIVISION VHS PV-V4521 - Manual (Page 14)

Timer Recording
[^1
VCR/
TV
«CDOO
S o 0 O
5o
POWER
SELECT/
SET
A: PLAY
TiSTOP
◄:REW
► :FF
□
□
□
n
□
n
1
Ready Check List
All connections made (pg. 8, 17).
TV and VCR plugged in and turned on.
VCR/TV selector set to “VCR.”
Clock set correctly.
Tape has rec. tab {pg. 4),
Remote in VCR mode. (Press VCR)
Press PROG*
to display PROGRAM.
REC
m Hjm wE5----
^ o o
PROG
Model PV-V4521 remote shown.
Example
Today
■31— 1 — 2 "
^8-9
7 selecta / T Selection Order
L
DAILY
^WEEKLY
(SAT)
WEEKLY
■ (MON)
___WEEKLY _J
(SUN)
If you are using a Cable Box, VCR
Timer Programming
Channel(Step 3) must be set to
the Cable Box output channel
AND your Cable Box must be
manually set to the desired
channel. The Cable Box power
left on.
If a power interruption occurs
while programming the timer, the
timer program(s) may be canceled.
If “TIMER PROGRAMS WERE LOST
DUE TO POWER INTERRUPTION”
appears on-screen, please reenter
the timer programs.
Press ▼
to display Program
screen.
1) To set record DATE,
press AT to select:
1-31= one time, or
DAILY= MON- FRI, or
WEEKLY= same time
each week and
press ► to set.
• See selection order
below left.
2) To set remaining
items, press
AT
to
select and press ^ to
set START/STOP
times, CH(channel) or
LINE input (pg.24),
and tape speed (SP,
LP, SLP).
Press PROG
to end program.
P timer prog . rCiiP
CANCEL lAOD/DLT
SELECT :* T SET:
EXIT : PROG_____
To Enter More Programs,
press AT to select and
press ^ to set an unused
program number and
repeat step 3.
Or
Press PROG again
to exit-
press POWER off
to set the timer.
(“TIMER” lights on Multi Function Display.)
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consuirerproducts® panasonic.com