beautypg.com

Safety instructions – Yamaha AM602 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

• Explanation of Graphical Symbols

A

The lightning flash with arrowhead symbol within an

equilateral triangle is intended to alert the user of the
presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

SAFETY INSTRUCTIONS

1.

Read Instructions—All the safety and operating instructions

should be read before the appliance is operated.

2.

Retain Instructions—The safety and operating instructions

should be retained for future reference.

3.

Heed Warnings—All warnings on the appliance and in the

operating instructions should be adhered to.

4.

Follow Instructions—All operating and use instructions should

be followed.

5.

Water and Moisture—The appliance should not be used near

water—for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool,
and the like.

6.

Carts and Stands—The appliance

should be used only with a cart or
stand that is recommended by the
manufacturer.

6A. An appliance and cart combination

should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.

7.

Wall or Ceiling Mounting—The appliance should be mounted

to a wall or ceiling only as recommended by the manufac­
turer.

8.

Ventilation—The appliance should be situated so that its

location or position does not interfere with its proper venti­
lation. For example, the appliance should not be situated on
a bed, sofa, rug, or similar surface that may block the ven­
tilation openings: or placed in a built-in installation, such
as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.

9.

Heat—The appliance should be situated away from,heat

sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.

10. Power Sources—The appliance should be connected to a

power supply only of the type described in the operating
instructions or as marked on the appliance.

11. Grounding or Polarization—^The precautions that should be

taken so that the grounding or polarization means of an
appliance is not defeated.

12. Power-Cord Protection—Power-supply cords should be routed

so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular atten­
tion to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.

13. Cleaning—The appliance should be cleaned only as recom­

mended by the manufacturer.

14. Nonuse Periods—The power Cord of the appliance should

be unplugged from the outlet when left unused for a long
period of time.

15. Object and Liquid Entry—Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure
through openings.

16. Damage Requiring Service—The appliance should be serv­

iced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged;

or

Objects have fallen, or liquid has been spilled into the

appliance; or

The appliance has been exposed to rain; or
The appliance does not appear to operate normally or

exhibits a marked change in performance; or

The appliance has been dropped, or the enclosure damaged.

B.

C.
D.

E.

17. Servicing—The user, should not attempt to service the ap­

pliance beyond that described in the operating instructions.
All other servicing should be referred to qualified service
personnel.