0 db = 0.775 v, All phone jack are unbalanced – Yamaha AM602 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INPUT CHARACTERISTICS
Input
terminals
Input
SW
Gain
Trim
Actual Load
Impedance
For Use With
Nominal
Input Level
Connector
In Mixer
Sensitivity*
Nominal
Maximum
before clip
CH 1, 2
MIC
MAX
10 kohms
50-600 ohms Mies
& 600 ohms Lines
-62dB (0.62mV) -50dB (2.5mV)
-28dB (31 mV)
Phone jack
MIN
-37dB (11 mV)
-25dB (44mV)
-3dB (549mV)
LINE
MAX
-43dB (5.5mV)
-31 dB (22mV)
-9dB (275mV)
MIN
-22dB (62mV)
-lOdB (245mV)
+12dB (3.1V)
CH 3 — 6 Input
10 kohms
600 ohms Lines
-22dB (62mV)
-lOdB (245mV)
Phone jack
AUX RTN 1, 2
10 kohms
600 ohms Lines
-32dB (19mV)
-20dB (78mV)
Phone jack
SUB IN
10 kohms
600 ohms Lines
-16dB (123mV) -lOdB (245mV)
RCA Pin jack
OUTPUT CHARACTERISTICS
Output terminals
Actual Source
Impedance
For Use With
Nominal
Output Level
Connector
In Mixer
Nominal
Maximum
before clip
ST OUT
600 ohms
10 kohms Lines
OdB (0.775V)
+17.5dB (5.8V)
Phone jack
AUX SND 1, 2
600 ohms
10 kohms Lines
-lOdB (245mV)
+17.5dB (5.8V)
Phone jack
PHONES
100 ohms
8 ohms Phones
-22dB (62mV)
-4.5dB (462mV)
STEREO Phone jack
SUB OUT
600 ohms
10 kohms Lines
-lOdB (245mV)
+17.5dB (5.8V)
RCA Pin jack
• 0 dB = 0.775 V
• All Phone Jack are unbalanced.
• Sensitivity is the lowest level that will produce an output of 0 dB (0.775 V), or the nominal output level when the unit
is set to maximum gain.
-9