Yamaha AM602 - Manual (Page 10)

SPECIFICATIONS
Frequency Response
+1. -2 dB, 20 Hz — 20 kHz. 10 kohms, 0 dB (ST
OUT)
+1, -2 dB. 20 Hz — 20 kHz. 10 kohms. -10 dB
(AUX SND 1. 2). (SUB OUT)
Total Harmonic Distortion
Less than 0.05%. 20 Hz •
+10 dB 20 kHz. 10 kohms.
Hum & Noise* (20 Hz — 20 kHz, Rs = 150
ohms, CHI, 2 Gain max.)
-122dB(CH1. 2) equivalent input noise.
-90 dB (ST OUT) residual output noise.
-76 dB (76 dB S/N) at ST OUT. Master fader
nominal, all channel faders minimum.
-72 dB (72 dB S/N) at ST OUT. Master fader
nominal, channel 1. 2 faders nominal.
-88 dB (78 dB S/N) at AUX SND. all channel
AUX controls minimum.
-82 dB (72 dB S/N) at channei 1.2 faders nomi­
nal. AUX controls nominal.
Maximum Output Levei
+17.5 dB. 20 Hz — 20
0.2%
kHz. 10 kohms. THD
Maximum Voitage Gain
62 dB CHI. 2 IN to STOUT
22 dB CH3
—
6 IN to ST OUT
58 dB CHI. 2 IN to AUX SND
18 dB CH3
—
6 IN to AUX SND
32 dB AUX RTN to ST OUT
16 dB SUB IN (ST) to ST OUT
6 dB SUB IN (AUX) to AUX SND
Crosstalk
-60 dB at 1 kHz. adjacent channel inputs.
-60 dB at 1 kHz. input to output.
Input Channel Equalization (CHI, 2)
15 dB maximum boost or cut
HI: 10 kHz (shelving)
LO: 100 Hz (shelving)
Ciip Indicators (ST L, R)
CUP (red) lights when ST OUT signai is 3 dB
beiow clipping.
Signai Indicators (ST L, R)
SIGNAL (green) lights when ST OUT signal
reaches -10 dB (10 dB below nominal output
level.)
Power Requirement
Power requirements match local AC mains volt­
age and frequency in area where sold.
Power Consumption
9 watts
Dimensions (W x H x D)
318 X 86 X 228 mm (12-1/2” x 3-3/8” x 9”)
Weight
1.8 kg (3 lbs. 15 oz)
* Measured with a -6 dB/octave LPF @ 12.7 kHz.
• 0 dB = 0.775 Vrms
- 8 -