Yamaha CLP-970AM User Manual
Clavinova, Owner's manual
Table of contents
Document Outline
- Clavinova.
- Cldvinova.
- Detailed Settings:
- Appendix:
- Table of contents
- Application index
- Maintenance
- Included Accessories
- Features
- Before Using the Clavinova
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Recording Your Performance
- Recording a New Song
- Oi^he^r recording techniques
- Adding data to or recording over an existing song
- Procedure
- Procedure
- Select a song you wish to change by using the SONG SELECT buttons.
- To change the voice or tempo in the middle of the song, specify the measure to change using the B [-]/ [+] buttons.
- Change the settings (voice, reverb, etc.).
- Press and hold down the [REC] button and select the track to change.
- 5. Press the [STOP] or [REC] button to exit record mode.
- Adjusting the volume balance between playback and your performance [SONG BALANCE]
- Procedure
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- • Select a song.
- • Access the File menu.
- Select the desired parameter.
- Set the parameter or execute the command.
- Close the File menu.
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Deleting songs in Clavinova Storage memory... [DeleteSong]
- Renaming a song...[RenameSong]
- Changing the type of characters on screen...[Char- acterCode]
- Playing Back Recorded Songs
- Playing back a song
- SONG BALANCE [^] [►]
- TEMPO [DOWN] [UP]
- Procedure
- Turning track playback on and off
- Playing back a song
- Connections
- Connectors
- Connecting a personal computer
- . Connecting the serial port on the computer to the Clavinova's TO HOST jack
- Connection
- Type of serial cables and connection pin assignments
- Clavinova HOST SELECT switch setting
- 2. Using a MIDI interface and the Clavinova's MIDI connectors
- Connection
- Clavinova HOST SELECT switch setting
- . Using the USB port on the computer and the UX256, a USB interface
- Connecting the UX256 to the Clavinova using a serial cable
- Parameter List
- Making detailed settings
- Detailed settings for recording and playback [SONG SETTING]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Procedure
- 1. Select a voice and press the [VOICE SETTING] button to access the "Voice Setting" menu.
- 2. Press the A [-]/[+] buttons to select the part for which you wish to change the voice.
- Setting the octave [Octave]^
- Setting the volume level [Volume]*
- Fine tuning the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the variation effect type [VariationType]
- Setting the variation effect depth [VariationSend]*
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- Procedure
- MIDI [MIDI SETTINC]
- About MIDI
- MIDI connectors
- [TO HOST] connector
- Procedure
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel (Port A) [MidiInAChannel]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Executing song data bulk dump [SongBulkDump]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- About MIDI
- Other settings
- Procedure
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSam- plingDepth]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Replacing the XG voices with preset voices [XGAlternative]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message
- Meaning
- Bulk[>a(laReceivin9
- Completed
- BulkDataReceitv'inS
- Error
- BulkDalaReceivin9
- BulkCia(taReceioin9
- Uoice
- Canceled
- Conpleted
- [XjplicateHane
- Execute?-->
- Executin9
- FactorySet Completed MemorySon9Excluded
- Message
- Meaning
- FaciorySet Conpleied MenorySonglncluded
- FlashMenoryLifeTine
- Exit--)
- LastPowerOfflllegal MenorySongChecking
- LastPowerOfflllegal MenorySongErrorRecoyered
- LastPowerOfflllegal MenorySongErased
- MenoryFull
- HoSongToDelete
- OyerWrite?
- PleaseUait
- Set?-)
- Message
- Meaning
- SongChanged Save?
- SongBror
- SongTooBig
- Starts-)
- Sure?--)
- ToHostError
- WrongNane
- Procedure
- Questions about Operations and Functions
- Appendix
- Preset Voice List
- Voice Combination Examples (Dual and Split)
- CLP-970A/970AM/970AC: Keyboard Stand Assembly
- Index