Recording to [track2, Procedure, Select a voice – Yamaha CLP-970AM User Manual
Page 43: Enter record mode and select a recording track
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ending methods:
Replace - The data after the point you stop recording will also be
erased.
Punch Out — The data after the point you stop recording will remain.
3-2
Keep holding down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red.
(To stop recording, press the [REC] button again or press the [STOP]
button.)
Follow the procedure beginning with Step 4 on page 40.
If you cancel recording by
pressing the [REC] button,
recording stops when you
press the button. If you can
cel recording by pressing
the [STOP] button, the Clavi-
nova locates the top of the
song.
Recording to [TRACK2]
This section explains how to record another part on the second track.
Procedure
1.
2.
1
Select a voice.
Select a voice (or voices) for recording.
Repeat Step 2 on page 40.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 2] button.
The [TRACK 2] indicator flashes in red. (To cancel recording, press
the [REC] or [STOP] button.)
Pressing the [TRACK 1] but
ton repeatedly toggles
between playback on (the
indicator lights up in green)
and off (the indicator turns
off).
Make the recording by following the procedure beginning with Step 4 on page 40.
You can record a new part while listening to playback of the recorded [TRACK 1] data.
CLP-970A
43
TIP