Detailed settings for the voices [voice setting, Procedure, Setting the octave [octave – Yamaha CLP-970AM User Manual
Page 72: Setting range, Setting the volume level [volume
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Detailed settings for the voices
[VOICE SETTING]
This menu enables you to make various detailed settings for the voices in Dual or Split mode and the effects. You can
make these settings for each voice (or each combination of voices) individually. You can listen to the notes you play
on the keyboard while changing the settings.
Procedure
1.
Select a voice and press the [VOICE SETTING] button to access the
"Voice Setting" menu.
[VOICE SETTING]
2.
Press the A [-]/[+] buttons to select the part for which you wish to
change the voice.
The range of the displayed part varies depending on the selected voice.
[Main]
MAIN voices (displayed with a single voice or in Split mode)
[Main X Layer] MAIN Voice 1 and Voice 2 (displayed when the MAIN side is in Dual
mode)
[Left]
LEFT voice (displayed in Split mode)
[Left X Layer] LEFT Voice 1 and Voice 2 (displayed when the LEFT side is in Dual mode)
In Dual mode, parameters with the “*” mark are set for Voice 1 and Voice 2 individually.
Setting the octave [Octave]^
You can shift the pitch up and down in octave steps.
See the procedure on page 66.
In Dual mode:
Voice for editing (Voice 1 or Voice 2)
Setting range:
-2 (two octaves lower - 0 (no pitch shift) - +2 (two
octaves higher)
Setting the volume level
[Volume]*
You can set the volume level for each voice part.
See the procedure on page 66.
72 ap-970A