Procedure, Oi^he^r recording techniques, Adding data to or recording over an existing song – Yamaha CLP-970AM User Manual
Page 44: Select a song for recording (p-001 - p-050), Other recording techniques
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording to the third or more tracks [EXTRA TRACKS]
You can continue recording other parts into tracks 3-16 [EXTRA TRACKS] one by one.
Procedure
1.
Hold down the [REC] button in step 2 in the "Record
ing to [TRACK2]" on page 43 and use the B [-]/[+] but
tons to select a recording track (3-16).
select a recording track (3-16)
2.
While holding down the [REC] key, press the [EXTRA
TRACKS] button.
Then, follow the procedure beginning with Step 4 on page 40.
Oi^he^r recording techniques
Adding data to or recording over an existing song
The previous section explains how to record your performance from the beginning by selecting a blank “P
000: NewSong.” You can also add your performance to or overwrite existing songs (such as 50 preset songs
[P-001—P-050], or your old recorded performances [see page 48]).
Procedure
1
Select a song for recording (P-001 - P-050).
Select one of the preset songs (P-001-P-050) instead of “P-000:
NewSong” as described in Step 1 of “Recording to [TRACK1]” on
page 39. To select a song from already-recorded data, see Steps 1 and 2
on page 53.
NOTE
If you record on a track that
already has data, the exist
ing data on the track will be
lost.
To continue recording, follow the procedure described in “Recording a New Song” from page 39 to 44.
44
CLP-970A