Procedure, Setting the midi transmit channel [midioutchannel, Setting for – Yamaha CLP-970AM User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Procedure
Press the [MIDI SETTING] button to enter MIDI setting mode.
[MIDI SETTING]
Setting the MIDI transmit chan
nel [MidiOutChannel]
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
See the procedure on page 66.
Select a voice part.
Specify the channel.
Setting for:
Main, Left, Layer, Left Layer
Setting range:
Ch1 - Ch16, Off (Not transmitted.)
Normal setting:
Main — Ch1
Left — Ch2
Layer — Ch3
Left Layer— Ch4
Setting the MIDI receive channel
(Port A) [MidiInAChannel]
This parameter enables you to specify for each channel
whether the Clavinova receives data at the MIDI [IN]
connector or the [TO HOST] port A (CBX driver’s
port A).
The received data is played back using the XG voices (page
6 in the “Reference Booklet” for the CLP-970A). You can also
assign the Clavinova's preset voices to part of the data. (See
“XG Alternative” on page 84.)
See the procedure on page 66.
Select a channel.
Setting for:
Ch1 - Ch16
Setting range:
On/Off
Normal setting:
On for all channels
Select On or Off.
MIDI data
1
MIDI IN
TO HOST
78
CLP-97QA
TIP