Yamaha CLP-970AM User Manual
Clavinova, Owner's manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\
IMPORTANT
Check your power supply
Make sure that your local AC mains voltage
matches the voltage specified on the name
plate on the bottom panel. In some areas a
voltage selector may be provided on the bottom
panel of the main keyboard unit near the power
cord. Make sure that the voltage selector is set
for the voltage in your area. The voltage
selector is set at 240V when the unit is initially
shipped. To change the setting use a “minus”
screwdriver to rotate the selector dial so that
the correct voltage appears next to the pointer
on the panel.
Clavinova.
CLP-970A
CLP-970AM
CLP-970AC
Owner's manual
G E N E R A L ^
^
|
miDi
Table of contents
Document Outline
- Clavinova.
- Cldvinova.
- Detailed Settings:
- Appendix:
- Table of contents
- Application index
- Maintenance
- Included Accessories
- Features
- Before Using the Clavinova
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Recording Your Performance
- Recording a New Song
- Oi^he^r recording techniques
- Adding data to or recording over an existing song
- Procedure
- Procedure
- Select a song you wish to change by using the SONG SELECT buttons.
- To change the voice or tempo in the middle of the song, specify the measure to change using the B [-]/ [+] buttons.
- Change the settings (voice, reverb, etc.).
- Press and hold down the [REC] button and select the track to change.
- 5. Press the [STOP] or [REC] button to exit record mode.
- Adjusting the volume balance between playback and your performance [SONG BALANCE]
- Procedure
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- • Select a song.
- • Access the File menu.
- Select the desired parameter.
- Set the parameter or execute the command.
- Close the File menu.
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Deleting songs in Clavinova Storage memory... [DeleteSong]
- Renaming a song...[RenameSong]
- Changing the type of characters on screen...[Char- acterCode]
- Playing Back Recorded Songs
- Playing back a song
- SONG BALANCE [^] [►]
- TEMPO [DOWN] [UP]
- Procedure
- Turning track playback on and off
- Playing back a song
- Connections
- Connectors
- Connecting a personal computer
- . Connecting the serial port on the computer to the Clavinova's TO HOST jack
- Connection
- Type of serial cables and connection pin assignments
- Clavinova HOST SELECT switch setting
- 2. Using a MIDI interface and the Clavinova's MIDI connectors
- Connection
- Clavinova HOST SELECT switch setting
- . Using the USB port on the computer and the UX256, a USB interface
- Connecting the UX256 to the Clavinova using a serial cable
- Parameter List
- Making detailed settings
- Detailed settings for recording and playback [SONG SETTING]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Procedure
- 1. Select a voice and press the [VOICE SETTING] button to access the "Voice Setting" menu.
- 2. Press the A [-]/[+] buttons to select the part for which you wish to change the voice.
- Setting the octave [Octave]^
- Setting the volume level [Volume]*
- Fine tuning the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the variation effect type [VariationType]
- Setting the variation effect depth [VariationSend]*
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- Procedure
- MIDI [MIDI SETTINC]
- About MIDI
- MIDI connectors
- [TO HOST] connector
- Procedure
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel (Port A) [MidiInAChannel]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Executing song data bulk dump [SongBulkDump]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- About MIDI
- Other settings
- Procedure
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSam- plingDepth]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Replacing the XG voices with preset voices [XGAlternative]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message
- Meaning
- Bulk[>a(laReceivin9
- Completed
- BulkDataReceitv'inS
- Error
- BulkDalaReceivin9
- BulkCia(taReceioin9
- Uoice
- Canceled
- Conpleted
- [XjplicateHane
- Execute?-->
- Executin9
- FactorySet Completed MemorySon9Excluded
- Message
- Meaning
- FaciorySet Conpleied MenorySonglncluded
- FlashMenoryLifeTine
- Exit--)
- LastPowerOfflllegal MenorySongChecking
- LastPowerOfflllegal MenorySongErrorRecoyered
- LastPowerOfflllegal MenorySongErased
- MenoryFull
- HoSongToDelete
- OyerWrite?
- PleaseUait
- Set?-)
- Message
- Meaning
- SongChanged Save?
- SongBror
- SongTooBig
- Starts-)
- Sure?--)
- ToHostError
- WrongNane
- Procedure
- Questions about Operations and Functions
- Appendix
- Preset Voice List
- Voice Combination Examples (Dual and Split)
- CLP-970A/970AM/970AC: Keyboard Stand Assembly
- Index