Panasonic TX-47P600H - Manual (Page 9)

Connecting the Aerial Cable to the RF In Terminal
VHF Aerial UHF Aerial
IX
Mixer
75 Ohm
Coaxial Cable
RF In Terminal
RFin
Terminal
75 Ohm Coaxial Cable
Coaxial Aerial Plug
Notes:
•To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
• If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your set.
• Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and accessories required.
• Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
Connecting Headphones
Connect headphones as follows.
(il (il,
ft]
Main Sub.
o i V
S VIDEO VIDEO L/MONO R
AUDIO
(3.5mm Plug)
~<=3ZZ)—
(Optional)
(not supplied)
You can listen to sound from each of the
headphones plugs as shown below.
Screen condition
Speaker
Sound
Main
Headphones
Sub
Headphones
Monitor
Output
Single picture/
Teletext
A
A
(Stereo)
A
(Stereo)
A
(Mono)
A
(Stereo)
Picture in Picture A i—1
[B]
A
(Stereo)
A
(Stereo)
B
(Mono)
A
(Stereo)
Picture and Picture A B
A
(Stereo)
A
(Stereo)
B
(Mono)
A
(Stereo)
Main Headphones plug:
When a Main Headphones plug is inserted into the Headphones socket, all speakers will be automatically disconnected;
only the Main Headphones will function.
Use Volume Up “+” or Down button to control volume level.
Sub Headphones plug:
For the sub Headphones volume control, refer to page 28.