How to connect the “avi, 2,3 or 4” input terminals, Connect vcrs and other peripheral equipment, Notes – Panasonic TX-47P600H User Manual

Page 10: Connections

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections

How to connect the “AVI, 2,3 or 4” Input Terminals

Connect VCRs and other peripheral equipment

(VHS VCR)

(Super-VHS VCR)

Notes:

• When an S Video cable is connected to the S Video terminal, the corresponding Video input will be switched off and

the signal from the S Video input will be used.

• When a Monaural VCR is used, connect the Monaural Audio cable to the Audio “L” (Left) terminal.

• Select the desired AV input position by pressing the TV/AV button. (Refer to page 13)

• Input 3 is located on the front of the unit.

• The AV2 and AV4 audio input terminals serve as the audio input terminal for both the Video input and the DVD input.