Panasonic SC-AK14 - Manual (Page 23)

Recording from compact discs
Press [± DECK 2 OPEN], and insert the tape.
Close the holder by hand.
Tape direction is automatically set to “1>".
Press [REV MODE] to select the reverse mode.
Every time you press the button:
t________ I
^ : One side is recorded, then recording stops auto­
matically.
'• Both sides {front side reverse side) are
recorded, then recording stops automatically.
Press [CD].
Insert CD In the tray.
(Perform steps D ~ 0 on page 15).
Press [(CD 1) (CD 5)] to select the disc you want.
Pressing p] will stop playback.
Press [• REC/STOP] to start recording.
• If you selected “ .CZ3 ” step 0, the direction will
automatically change to “ " when recording starts.
• The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 15).
• The tape deck stops automatically when the CD is finished.
To stop recording
• To add a 4 second silent interval before stopping
Press PJ. The CD will stop automatically too.
• To stop recording without a silent interval
Press [• REC/STOP], The CD will stop automaticaJiy too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1, Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [-^] and immediately thereafter p]. The tape direction will
be shown as “<3".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
B
To record programmed tracks
1. After step □, program the track you want (perform steps 0~0 on
page 17).
2. Press [• REC/STOP] to start recording.
U)
C
I
.r
■E
0
1
RQT5539