Panasonic SC-AK14 - Manual (Page 21)

¡ TM” I /
l_i _ u
E13 :
T/ ) I / “(
! -Lf C l_ t"> C l_l _ Ul
(a»
□
Tape direction of the tape you are recording
onto
i l l I I / I
C l_ T' I ' L
áE]
Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE 1 ✓
HIGH POSmON/TYPE II /
METAL POSITION/TYPE IV X
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
To record from the beginning of the tape □
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume/ sound quality/field affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.
To erase a recorded sound
1. Press (TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
3. Press [REV MODE] to select reverse mode.
4. Press [• REC/STOP].
• You cannot open deck 1 v^rhile recording.
• You cannot fast-fonward or rewind one deck while recording with
the other.
Tape-fo-tape recording
The recording level will be recorded as it is on the tape being played
back.
n Press {JAPE, DECK 1/2].
Press [± OPEN] on both decks and Insert the tapes.
For pla^ack: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to “O”.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
z^z:>^cz:>
t_________ I
^ :One side is recorded, then recording stops
automaticaily.
sides (front side reverse side) are recorded,
then recording stops automatically.
Press [TAPE EDIT) to start recording.
• If you selected “ CZ3 ” in step Q, the direction will
automatically change to “ ” when recording starts.
To stop recording
Press [■].
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [-^j and immediately thereafter [■]. The tape direction will
be shown as “<]".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
W)
Í
I
I
tt
RQT5539