Panasonic SC-AK14 - Manual (Page 17)

4-----
o
—5—
o
^ 6
o
>10
o
7 8 g 0
o o o
Specified track number
1 1
^ ‘
Program order
E
►/Il/A
i_(
n-n 1
U'U I
"i I T( 1 11 1
l_ J.I 1 )_l U L
ET
,7
— —
T) r
U 1"
S lit
(
Indicates
”1 program mode
listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
□
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] - [5] to select the disc you want.
Press the numeric button to select the desired track.
□
Repeat steps 0 through 0 until you have pro­
grammed ail the tracks you want.
□
Press [►/Il/A].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing
P] will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press [>10] and then the two numbers you want.
When “CD FULL" appears 0
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode 0
• Check program contents.
Press or
Every time you press one of the buttons, the track and program No.
are shown on the display.
• Add to the program.
Repeat steps Q through Q.
• Cancel entries.
C
&
I
From the last
programmed track Press [CANCEL].
A specified track
only Select the track with or
[► ► ► W], and press [CANCEL] within
3 seconds.
Alt tracks Press P].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [►/II/Aj.
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.
RQT5539