Panasonic PANASYNC/PRO TX-D1F64 - Manual (Page 6)

1) High Image Quality in a Package
• Panasonic Panasync/Pro PI lOi with a CRT 21" (20.0" / 50.8 cm Viewable Image Size) has image quality
that has to be seen to be believed. It has a 0.25 mm ultra fine dot pitch and up to 1,600 x 1,200 at 92 Hz /
1,800 X 1,440 at 70 Hz maximum resolution. The Panasync/Pro P110i produces sharp saturated color
images with High Contrast and Brightness that can be viewed over a wide viewing angle.
• Combined with optimized dynamic focusing circuitry, the CRT has improved beam landing accuracy, focus,
convergence and lower raster distortion than a typical 21-inch CRT. This gives the Panasync/Pro P110i a
sharper, more uniform focus, especially in the corners of the screen, traditionally a focus problem area.
Crystal Pigment Phosphors and Advanced Invar Mask provide increased Contrast and Brightness.
• Panasync/Pro digital multi-scan 30 kHz to 117 kHz* Horizontal and 50 Hz to 180 Hz Vertical scanning
frequencies can be automatically scanned. Eight timing selections have been preset at the factory and 20
user programmable selections are provided.
2) Crystal Pigment Phosphors
• Crystal Pigment Phosphors provide increased brightness and contrast for the PllOi creating crisp colorful
images. Each grain of Crystal Pigment Phosphor is covered with a filter material of the same color to titter
external light.
3) Advanced INVAR Shadow Mask and Dark tint
• The CRT also features an Advanced INVAR Shadow Mask, which is manufactured with an improved material
and designed to be positioned closer to the screen glass. When combined with the Dark tint of the screen,
this results in a 10% overall increase in brightness, improved purity due to less environmental movement,
and better overall color uniformity.
4) New DQ-DAF^“ Electron Gun with Super New OLF
• The new DQ-DAF (Double-Quadruple Dynamic Astigmatism and Focus) electron gun reduces the
degradation of the screen focus, realizing higher resolution. In addition, the super new OLF (Overlapping
Field) main lens for the PI lOi creates a smaller spot size which contributes to sharper images.
5) Digital adjustment using on-screen Menu (OSM)
• The On-Screen Menu is available in five (5) languages. English, French, German, Italian or Spanish can be
selected. Custom adjustments can be made quickly and easily through the On-Screen Menu utilizing four
buttons on the front panel. The On-Screen Menu may be positioned in one of six locations and color in one
of six colors on the Display Screen. A Self-Test On-Screen display is provided with no signal input or an
Error On-Screen Menu if the Horizontal or Vertical Scanning frequencies are outside the specified range.
6) The P l l O i is Plug & Play
• VESA* DDC™ 1 / 2B compatible (Video Electronics Standards Association Display Data Channel). This
allows the PllOi to inform a compatible host of its capabilities that meet the Microsoft* / Intel® Plug & Play
Definition used by Windows* 95 and Windows® 98.
7) Self-test menu
• The display unit can be checked via the self-test menu displayed on the screen. This menu can be accessed
without a computer.
8) Environmentally Friendly
• The PllOi has a VESA® DPMS™ power management circuit. When used with a DPMS™ compatible
graphics card, the power consumption of the PllOi can be reduced. This product conforms to the
E nergy S tar * program.
• All plastic parts are recyclable.
• Meets MPR II, TCO’92 and carries the CE mark.
9) Color Adjusting Function
• The White Reference Color Temperature is 9300 К -i- 8 MPCD, 7500 K, 6500 K, 5000 K. 9300 К + 27 MPCD
or User Color which can be selected to adjust the red, green and blue signals of the monitor to match its
image to the output of a color printer.
10) Ergonomic Design
• Tilt & Swivel base with 90-degree pan to right or left and tilt angle of 13 degrees up a 3 degrees down.
• Advanced Anti-Glare, anti-Refection, and Anti-Static screen coating.
FCC Class B Complied : Up to Mode 1,600 x 1,200 at 115 kHz max. and 1,800 x 1,440 at 105 kHz max.
Horizontal frequency.