To print the document, follow the steps below, Ex: © @ d), Machine will start to print the documents – Panasonic 990 User Manual
Page 89: Receive to r/iemoty
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receive To R/iemoty
After receiving a document with the Receive To Memory feature, the following message will appear on the
display.
MESSAGE IN MEMORY
< RCV TO MEMORY >
To print the document, follow the steps below.
1
FUNCTION
C
©
SET
'H'
Enter the password to print the documents.
{See Note 1)
Ex: © @ d) ®
SET
&
Machine will start to print the documents.
SELECT
MODE
(1-5)
ENTER NO. OR
V A
RCV TO MEMORY=ON
l:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT
l:OFF 2:ON 3;PRINT
INPUT PASSWORD
INPUT PASSWORD
1234
* PRINTING *
MEMORY RCV'D DOC
^
NOTE
3
password has not been set, your machine will not prompt you to enter the password.
2. The documents will be printed immediately after pressing \
SET I
in
step 4.
3.
Once the RCV TO MEMORY feature is set to "On", the password
cannof 5e
changed (Fax
Parameter No. 37 will not be shown on the LCD display). If you wish to change the password,
set RCV TO MEMORY feature to “OIP first. Then change the password. (See page 88)
89