Sending documents – Panasonic 990 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
You can do the following while sending a document from memory or receiving a document.
• Reserve the next transmission into memory for up to 70* different files
(*UF-890: 30 different files).
•
Reserve a priority transmission.
Memory Transmission Reservation (Multi-tasking)
If your machine is on-line busy transmitting from memory, receiving or printing received documents, you can
reserve a transmission by the following procedure.
1
Your machine is on-line, the ON LINE lamp is blinking or
printing received documents.
ON LINE * MEM.XMT *
ID:(Identification)
2
^
ON LINE * PC MODE * |
ON LINE * RCV * 1
ID:(Identification) 1
ON LINE * PRT MODE * 1
*
PRINTING
*
1
MEMORY RCV'D DOC |
* PRINTING PC DATA * |
*
PRINTING
*
1
PC DATA 1
Set document{s) face down.
ENTER STATION(S)
THEN PRESS START 001
'
memory
I I
Make sure that the MEMORY lamp is on.
If not, press "On". MEMORY to set "On".
Dial by any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing, press { SET I after each
station is entered
(UF-990: Up to 70 stations, UF-890: Up to 32 stations)
• Directory Search Dialing, press I SET I after each
station is entered
(For details, see page 47 to 50.)
Ex:
01
Your machine will store the document(s) into memory.
<01>(Station name)
5551234
STORE *
N0.005
PAGE3=001
01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
^
^
t. To cancel the memory transmission resen/ation, see page 82
^------------------------ ^
2. If the same station has been reserved with different files, the files will be executed in a single
transmission (Batch Transmission). (See page 66)
57