Using one-touch/abbr. number dialing, Using manual number dialing, Essing – Panasonic 990 User Manual

Page 127: Tf® §©oixâ a [d)c2xgq00dd(mls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

essing

TF® §©OiXâ a [D)C2XgQ00DD(MlS

Using One-Touch/ABBR. Number Dialing

The operation is the same as for normal dialing

ENTER STATION(S)

THEN PRESS START

Set document(s) face down.

Ex:

<01>(Station name)

5551234s2762

STORE *

N0.001

PAGES=001 01%

The document is stored into memory and your machine

starts to dial the number of the station and sends the

document(s) with Sub-addressing information.

Using Manual Number Dialing

Use ISUB-ADDRI to separate the Telephone number and the Sub-address.

ENTER STATION(3)

THEN PRESS START 00%

Set document(s) face down.

SUB-ADDR then

Enter the telephone number, press

enter the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)

Ex: Telephone number = 5551234, Sub-address =2762

Enter as; (5) (5) (5) © @ @ ( 4 )

sub

I(^(7)@@

TEL. NO.

5551234S2762I

STORE *

N0.001

PAGES=001 01%

The document is stored into memory and your machine

starts to dial the number of the station and sends the
document(s) with Sub-addressing information.

C NOTE

ISUB-ADDRI

separates the Sub-address from the Telephone number and is indicated by an

"s"

in the display.

2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.

3. The Sub-address is not transmitted during Manual Redial Mode.

127