Panasonic 990 - Manual (Page 42)

42
'asic Traosmissioo Settomigs
un O i l 0
You can temporarily change the transmission settings either before or after you place the document on the
ADR
These settings are as follows
• Contrast
• Resolution
• Halftone
• Stamp
• Communication Journal
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press I contrast ! to:
DARKER
a UGHTER
CONTTRAST
CONTRAST = Normal
1=1 DARKER
-Jcza^GKTER
cbhiTRAST
CONTRAST = Ughter
-C
3
H
1
ARKER
CD UGI-TTER
CONTRAST
CONTRAST = Darker
(SsgisMiteOD
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press RESOLUTION to:
a S'FINE
CZJ FINE
RESOLLmON
► ■ .....................*
RESOLimON = Standard
a S-RNE
RESOLUTION
RESOLUTION = Rne
-D-S-BNE
^ m RNE
RESOLUTION
RESOLUTION = Super Rne
( NOTE )
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See
page 36)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See
page 36)
3. If you send a photographic document with Halftone set to Fast or Quality and the Resolution
set to Super Fine (406 pelsTinch x 391 lines^nch), the reproduction of the received document
will be detemiined by the capability of the remofe sfa//on.