Set document{s) face down, Make sure that the memory lamp is on, If not, press “on", i memory to set “on – Panasonic 990 User Manual
Page 47: Ending documente, D (d ® © (d (d, Manual number dialing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ending Documente
îfflSOùiXâOJ^
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
1
^
ENTER STATION(S)
THEN PRESS START 00%
Set document{s) face down.
^ I ^
EMORY
Make sure that the MEMORY lamp is on.
If not, press “On", i MEMORY to set “On
Enter a telephone number from the keypad.
Ex:
(D (D ® © (D (D ©
TEL. NO.
55512341
STORE *
N0.002
PAGES=00i 05%
The document is stored into memory with a file number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
* DIALING *
N0.002
5551234
NOTE ^
1- If you need a special access number to get an outside line, dial it first then press
I
PAUSE
I
fo
enter a pause (represented by a before dialing the full number.
Ex: 9 PAUSE 5551234
2.
If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
( TONE
I
(represented by a V).
The dialing mode will be changed from Pulse to Tone after dialing the digit
Ex: 9 PAUSE TONE 5551234
3.
This feature is called “Quick Memory Transmission”. If you wish to store all the document(s)
into
memory
first
before
transmitting,
change
the
Fax
Paramefer
No.
82
(QUICK
MEMORY
XMT) to “ Invalid". (See page 39)
47