Panasonic KX-TG2650N User Manual
Fcailer id compatible
Table of contents
Document Outline
- Attach your purchase receipt here.
- For your future reference
- Base unit
- Handset
- Handset
- Base unit
- Backlight LCD Displays
- Battery strength
- Recharge
- Battery information
- If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”. Your phone comes from the factory set to “Tone". Make sure the unit is in the standby mode initially.
- Press ® or ® repeatedly until the arrow
- 2 points to “Program”.
- Press ® (Yes key).
- Press ® (Yes key).
- Press ® or ® to select “Pulse” or “Tone”.
- Press ® (Save key).
- If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 50). Your phone comes from the factory set to “A”.
- Press (▼] or ® repeatedly until the arrow points to “Program”.
- Press 0 (Yes key).
- Press ® or @ repeatedly until the arrow points to “Set line mode”.
- Press 0 (Yes key).
- Press © or 0 to select “b” or “a”.
- Press 0 (Save key).
- During programming:
- Handset ringer volume
- Base unit ringer volume
- To have a hands-free phone conversation (Using Digital Duplex Speakerphone)
- To adjust the receiver volume (High, Medium or Low) or speaker volume (6 levels) while talking
- If noise interferes with the conversation
- To redial the last number dialed on the handset
- To dial after confirming the entered number
- To redial after confirming the last number dialed
- Lighted handset keypad
- With the Base Unit (Digital Duplex Speakerphone)
- To adjust the speaker volume (8 levels) while talking
- To redial the last number dialed on the base unit
- To put a call on hold
- To release the hold
- Useful information
- Auto Talk
- How caller information is displayed when a call is received
- To check the number of new calls
- What “V” means
- If a caller calls more than once
- With the handset
- With the base unit
- With the handset
- With the base unit
- To erase all entries in the Caller List
- With the handset/base unit:
- Make sure the unit is in the standby mode Initially.
- Press iFUNCTION/CHl.
- Storing must be carried out with the handset.
- Make sure the unit is in the standby mode initially.
- While the arrow points to “Save directory”, press ® {Yes key).
- Enter a name, up to 15 characters using the dialing buttons (p. 38).
- Press 0 (Next key).
- Enter a phone number, up to 22 digits.
- Ci3
- Press ® (Next key).
- To turn the call group feature on, select
- “On” by pressing 0 or B.
- If not required, select “off”.
- Press ® (Next key).
- Press (►) (Save key).
- If you make a mistake while entering a name
- For example, to enter “Tom Jones”;
- With the handset/base unit
- To search for a name by initial
- Index table
- With the handset With the base unit
- Press @ or 0 to enter the directory list.
- Press 0 or ® to enter the directory list.
- Press ® or ® repeatedly to find the directory item that you want to dial.
- Press 0 or 0 repeatedly to
- find the directory item that
- you want to dial.
- Programming must be carried out with the handset.
- Make sure the unit is in the standby mode initially.
- With the handset
- With the base unit
- Paging the base unit from the handset
- Paging the handset from the base unit (Handset locator)
- From the handset to the base unit
- From the base unit to the handset
- To erase a stored number
- With the handset
- With the base unit
- (For Analog PBX Line/Long Distance Service Users)
- Call Waiting Caller ID Feature
- (For Rotary or Pulse Service Users)
- Selecting the flash time
- To attach the belt clip To remove the belt clip
- Connecting the headset to the handset
- Connecting the headset to the base unit
- Making/Answering calls
- Handset display
- Base unit display
- CAUTION:
- WARNING:
- For product service
- When you ship the product