Panasonic KX-TG2650N - Manual (Page 32)

Using the Caller List
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory. You can also turn the call group feature on for certain
callers (p. 35).
Storing must be carried out with the handset.
Make sure the unit is in the standby mode initially.
1
2
Press ® or ® to enter the Caller List.
Press ® or ® repeatedly to find the
caller you want to store in the directory,
and press ® (Yes key).
•If the number requires editing, see page 30.
Press ® or ® to select “save
directory”, and press ® (Yes key).
If there is no name information for the
caller, “Enter name” will be
displayed.
a) If a name is not required, press ®
(Next key) twice.
b) If a name is required, enter the name
(p. 38). When finished, press ®
(Next
key) twice.
To turn the call group feature on, select
“On” by pressing ® or ®.
If not required, select “off”.
(See page 37, from step 7.)
10 new calls
TA
►=Directory
CINDY TURNER
1-234-456-7890
11:20A JAN.12 X3
► Edit
Save directory
TA
►=Yes
Edit
► Save directory
TA
► =:Yes
Enter name
D
T=Next
Enter name
CINDY TURNER
4 ^
T-Next
C3P
Set group
:Off
T=Next
CO
•You can exit the programming mode any time by pressing lOFF],
•If the display shows
“Directory full" in step 3, press [OFF] to exit the list.
To erase other stored items from the directory, see page 43.
•You cannot store caller information in the directory if a phone number is not
displayed.
»If
3
beeps sound and the display shows
“save error",
move closer to the base
unit and start again from step 1.
32