Panasonic KX-TG2650N - Manual (Page 48)

Voice Mail Service
Listening to Voice Mail Messages
After receiving a voice mail message,
“voicemail”
and “El ’’will be
displayed and the VOICE MAIL button on the base unit will flash. You can
listen to your voice mail message(s) using the handset or the base unit
With the handset
1
Press I VOICE mail !, and
press S) or RH.
•The unit is connected to the
telephone line and dials the
access number {p. 46).
Follow the pre-recorded
instructions.
When finished, press (OFF).
With the base unit
1
Press [VOICE MAIL).
•The unit is connected to the
telephone line and automatically
dials the access number (p. 46).
Follow the pre-recorded
instructions.
When finished, press
[DIGITAL SP-PHONEI.
•If
“Voicemail”
and “El ”
Still
remain on
the
display and the VOICE MAIL button
on the base unit still flashes even if you have listened to your voice mail______
message{s), press [FUNCTION/CHl, and press and hold ICLEAR/INTERCOMI
on the handset until the unit beeps, “voicemail” and “E ” will disappear and
the button will go off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, ‘Voicemail” and “¡SI" may not be displayed and the
VOICE MAIL button may not flash.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
48