Battery replacement, Recharge battery – Panasonic KX-TG2650N User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Battery Replacement
If
“Recharge battery”
is displayed and/or “ (
■ ]” flashes after being
fully charged, replace the battery with a new Panasonic HHR-P509
(PQHHR150AA23) battery. To order, call the accessories telephone
number on page 2.
1
Remove the cover by
sliding it up while
pressing the arrow.
Remove the old battery.
Then install the new
one:
©Pinch the battery
leads at the distance
of about 10 mm from
the battery plug with
the red lead on the
right and the black
lead on the left.
©Insert the battery plug
into the connector in
the handset vertically.
©Press the plug with
your finger tip to
ensure it is firmly
inserted.
Close the cover. Make sure you charge the new battery for about
8 hours in order to display the battery strength prompt correctly
(p. 11).
•You need to confirm the handset ringer volume (p. 17).
58