To turn the call group feature on, select, On” by pressing 0 or b, If not required, select “off – Panasonic KX-TG2650N User Manual
Page 37: Press ® (next key), Press (►) (save key), Next, Save, Directory full, Save error
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
To turn the call group feature on, select
“On”
by pressing 0 or B.
If not required, select “off”.
•When
“On”
is selected, the display will light in
orange and a different ringer pattern will be
heard. When
“Off”
is selected, an ordinary
ringer pattern will be heard.
Press ®
(Next
key).
•If you want to change the storing name,
number or group setting, press (B (Edit key)
repeatedly to reach the desired display and
change it.
Set group
:On
?=Next
15C3
Tom Jones
0987654321
A=Edit ► =Save
___________ OP
Press (►)
(Save
key).
•A beep sounds.
•To continue storing other items, repeat from
step 2.
•To return to the standby mode, press (OFF).
•If a pause is required for dialing, [REDIAUPAUSE] can be stored in a phone
number in step 5. This counts as one digit (p. 49).
____
•You can exit the programming mode any time by pressing |OFF|.
• If the display shows
“Directory full”
in step 2, press [OFF], To erase other
stored items from the directory, see page 43.
•After the maximum of 90 items has been stored,
“Directory full”
is also
displayed.
•If
3
beeps sound and the display shows
“Save error”,
move closer to the base
unit and start again from step 1.
37