Press ® or ® repeatedly until the arrow, 2 points to “program, Press ® (yes key) – Panasonic KX-TG2650N User Manual
Page 13: Press ® or ® to select “pulse” or “tone, Press ® (save key), Selecting the dialing mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Dialing Mode
You can program the dialing mode using the handset near the base
unit.
If you have touch tone service, set to “Tone”. If rotary or pulse service is
used, set to “Pulse”. Your phone comes from the factory set to “Tone".
Make sure the unit is in the standby mode initially.
1
Press
IFUNCTION/CHI.
Press ® or ® repeatedly until the arrow
2 points to
“Program”.
Press ®
(Yes
key).
4
Press ® or repeatedly until the arrow
points to
“Set dial mode”.
Press ®
(Yes
key).
Press ® or ® to select
“Pulse”
or
“Tone”.
7
!
Press ®
(Save
key).
'A beep sounds.
____
•To return to the standby mode, press (OFF).
► Save directory
Ringer volume
TA
► =Yes
► Program
TA
► =Yes
► Save DIRECT#
Set flash time
TA
► =Yes
► Set dial mode
TA
► =Yes
Dial mode
TA
: Tone
► =Save
Dial mode
:Pulse
TA
► =Save
Dial mode
:Pulse
»You can exit the programming mode any time by pressing [OFF].
•If the handset has lost communication with the base unit, 3 beeps sound and
“No
link to base. Place on cradle and try again."
is displayed.
13