Panasonic KX-F2350NZ - Manual (Page 49)

Automatic reception
Set the RECEIVE MODE to any of the following modes:
—ANS/FAX mode
—TEL/FAX mode
—FAX mode
When receiving a fax call, the unit will automatically switch to the fax mode, then initiate reception.
Receiving in the ANS/FAX mode
1
RECEIVE MODE
l ANS/FAX
ITEUFAX
I FAX
I TEL
Make sure that the unit is in the ANS/FAX mode.
A call comes in.
The unit answers the call after 2 to 4 rings or no rings,
depending on the number of rings after which the unit is
set to answer. See page 1 -28.
-When receiving a fax tone, the unit automatically
activates the fax function to receive documents.
-When receiving a voice-call, the unit plays your
greeting message.
HELPFUL HINTS:
•If the other party wishes to leave you a message and transmit a document on the same call, let
them know the following procedure in advance.
When the other party's line has touch tone service:
1. After leaving a message, the other party presses their ^ button.
Your unit will switch to the FAX mode.
2. When a fax tone is heard, they start transmission by pressing their start or transmit button.
When the other party’s line has rotary pulse service:
1. They start transmission by pressing their start or transmit button.
Your unit starts reception.
2. They make a call reservation (e.g.... lift the handset) during transmission of their document.
Your unit plays your greeting message.
3. They leave a message after the long beep following your greeting message.
•Begin by transmitting the FAX CORRESPONDENCE leaflet found on page 6-17 to several of
your associates. In this way you can confirm that your unit is functioning correctly and inform
them of the procedure for transmitting documents and/or recording voice-message on your unit.
NOTE:
If you set the RINGER OFF through the ANS/FAX RING COUNT function, the extension phone
connected to the unit will ring twice when receiving a call. See page 1-28 for the RINGER OFF
setting.
2 -7