Panasonic KX-F2350NZ - Manual (Page 13)

■.■ ' ^ ‘ ■'
O PAPER OUT Indicator;
Page 1-11
ALARM Indicator;
Page 1-13
O LCD (Liquid Crystal Display)
O PROGRAM Button:
Page 1-19
SET Button;
Page 1-19
AUTO DIAL Button:
Pages 3-4 to 3-8
OHELP Button;
Page 1-33
0 POLLING Button and Indicator:
Page 4-4
o LIGHT ORIGINAL Button
and Indicator:
Page 2-3
o RESOLUTION Button
and Indicators:
Page 2-3
o RECEIVE MODE Button
and Indicators:
Pages 1-16 and 2-7
Q Indicator;
Page 2-10
di)TONE Button:
Page 4-29
0 PAUSE Button;
Page 4-30
RECALL Button:
Page 4-29
REDIAL Button:
Page 2-16
0 MUTE Button and Indicator:
® SP-PHONE (VOICE STDBY)
Button and Indicator:
Pages 2-4, 2-15 and 4-28
The indicator lights when the recording paper roll is
empty.
The indicator lights when any trouble occurs.
Used to start or end programming functions.
Used to store parameters during programming.
Used for speed dialing.
Used to print an easy guide of programming procedures.
Used for polling function. The indicator lights when this
feature is on.
Used to transmit or copy originals with faint writing. The
indicator lights when this feature is on.
Used to adjust scanning line density. The indicators light
to show which setting you are using.
Used to select the desired receiving mode. The
indicators light to show the mode in which the unit is set.
The indicator flashes when any new incoming messages
have been recorded.
Used to change the dialing mode from pulse to tone
during a dialing operation.
Used to insert a pause into a phone number during
programming.
Used to access some features of your host PBX.
Used to redial the last dialed number.
Used when you do not want your voice to be heard by
the other party. The voice of the calling party will still be
heard. The indicator lights when this feature is on.
Used for on-hook dialing and voice contact features. The
indicator lights when these functions are on.
1 -5