Panasonic NV-F55EA - Manual (Page 30)

Timer Recording
The programming of timer recordings is possible both on
the VTR itself and via the Remote Control Unit.
Programming of as many as 8 timer recording is possible
up to one month in advance.
CZD
1 11
Preparation
• Make sure that the clock shows the present time
correctly,
• Make sure that the Timer Record Function is set to “Ofr.
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Adjust the audio recording level as described on page 27.
For Example:
Programming a timer recording for a TV programme that
will be broadcast on Wednesday, October 27, from 10:30
to 11:45, on programme position (channel) 12, on timer
programme number 2. (Present date=October 10, 1999)
1 Press the Programme/Check Button to select the next
unoccupied timer programme number.
• Press the Tape Speed Selector Button until the
Indicator of the desired tape speed (“SP” or “LP”) is
lit in the Multi-Function Display.
-----------------^------------------------
CO
■ ■ ■ ^ _
>TV
2 Press the “ + ” or Button to select the programme
position (channel) on which the TV programme will be
broadcast.
CD
MV
4 Press the or Button to set the date.
5 Press the Next Button.
6 Press the ‘‘-i-” or Button to select the hour of the
starting time of the TV programme.
7 Press the Next Button.
8 Press the “-i-" or Button to select the minute of
the starting time of the TV programme.
9 Press the Next Button.
10 Press the “+” or Button to select the hour of the
end time of the TV programme.
11 Press the Next Button.
12 Press the “-t-” or Button to select the minute of
the end time of the TV programme.
2
=.... 1 : gkf
V_______ ________
{ . M l
J
Press the Timer Record Button.
r
2
•The tape speed (SP/LP) can be selected in any of
the steps 1 to 12.
3 Press the Next Button.
30