Panasonic SC- AK54 - Manual (Page 26)

■ 5.:;^ ^ ■ ■ -t'; . ji' -f?;-- .
SC-AK52 and 15 only
Dial [SOUND EQ] to display “MANUAL”.
When it is turned clockwise, the settings are selected in the
following sequence.
(1) HEAVY ^
( t CLEAR
@ SOFT
(
4 ) DISCO
® LIVE
® HALL
(
7 ) MANUAL
® AI-EQ
® FLAT ------
Around 330 Hz:
Around 1 kHz;
Around 3.3 kHz:
Above 10 kHz;
i
T
direction;
Adjust the sound quality.
<- —) direction: For selecting the range of the sound to
be adjusted
Characteristics of each sound range
Under 100 Hz:
Super woofer range
Bass to midrange
Midrange
Midrange to treble
Treble
For adjusting the level (7 steps)
When the level is in the center, the dot flashes rapidly.
Repeat steps ® and @ to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT”.
• The sound quality setting is stored automatically. It is recalled when
“MANUAL” is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
ii
SC-AK52 and only
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.
I I I Press [3D Al] to adjust the surround level.
L-iJ Every time you press the button:
3D All —^ 3DAI2
AI-EQ—I
Adjust the sound quality.
@ <-----> direction: SOFT-SHARP setting
@ -I T
direction: LIGHT-HEAVY setting
Repeat steps ® and @ to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT”,
• The sound quality setting is stored automatically. It is recalled when
“AI-EQ" is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.