Press [cd, Press [(cd 1) (cd 5)] to select the disc you want, Press [• rec/stop] to start recording – Panasonic SC- AK54 User Manual
Page 23: To record programmed tracks
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Wind up the leader tape so recording can begin immediately.
m Press [± DECK 2 OPEN], and insert the tape.
““ Close the holder by hand.
SC-AK52HSC-AK44
B
1 and
[SC-AK22: Russia and Ukratna]
only
Press [REV MODE] to select the reverse mode.
Every time you press the button:
Z^to-^cz:>
t_________ 1
^
: One side only records.
: Both sides (front reverse) record.
“C^lD"automaticalIy changes to when [•REC/STOP] is
pressed.
Press [CD].
Insert CD In the tray.
(Perform steps D - 0 on page 15).
Press [(CD 1) (CD 5)] to select the disc you want.
Pressing [■] will stop playback.
Press [• REC/STOP] to start recording.
• The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final disc
(page 15).
• The tape deck stops automatically when the CD is finished.
To stop recording
• To add a 4 second silent interval before stopping
Press [■]. The CD will stop automatically too.
• To stop recording without a silent interval
Press [• REC/STOP]. The CD will stop automatically too.
To record programmed tracks
1. After step D. program the track you want (perform steps 0 ~ 0
on page 17).
2. Press [• REC/STOP] to start recording.
SC-AK52ISC-AK44
11SC-AK22: Russia and Ukraine |
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [-^/ll] and immediately thereafter
Ml
The tape direction
will be shown as
ISC-AK22: except Russia and Ukraine |
To record on the other side of the tape
Turn the tape over and press [• REC/STOP].
(A
!
i
I
RQT5666