Press [clock/timer] to select "clock, Switching displays, To mute the volume – Panasonic SC- AK54 User Manual
Page 11: Press [muting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i K i
This is a 24-hour display clock.
This example in the figure shows how to set the time for 16:25,
n Switch on the unit.
Press [CLOCK/TIMER] to select "CLOCK”.
Every time you press the button:
CLOCK-*- ©PLAY -*- ©REC
L Previous display —I
(within 7 seconds or so)
Press [TUNE/TIME ADJ (V) or (A)] to show the
present time.
^ ^ Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
□
To display the time when system Is ON
Press [CLOCK/rtMERl to select “CLOCK".
To display the time when system is OFF
Press [CLOCK/TIMER].
The time wili be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Bigg
The clock may lose or gain some time over a period. Readjust if
necessary.
Ci>nv0ftiénf^^i^iùn$
Switching displays
Press [-DISPLAY/-DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal —- Peak hold —-Aurora
^
---------- (OFF)*----------- ^
To mute the volume
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
“MUTING" goes out.
Muting can also be canceled by lowering the volume all the
way (-dB).
When the system is turned off, the muting operation will be
automatically canceled.
I
3
fmm
RQT5666