Selecting the input mode, Record one program while watching another, Selecting channels at the vcr – Panasonic PV-7451 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Input Mode
INPUT
Push INPUT. The display will
change in the order below.
-►LlNEl
r
Channel
Number
■LINE2
Multi Function
Display
or
VCR/TV
CHANNEL
Up/Down
r CH ' '
iOl
L- _____________
Push CH A / T . The display will
change in the order below.
► 1 —' 2 — 3
(
(CATV) (TV) )
------
------ or 69’*^
LINE2^1NE1-
LINEI: For rear audio/video connection.
L1NE2: For front audio/video connection.
When LINE is selected, “L1" or “L2" is displayed in
the Multi Function Display for about 4 seconds.
Record One Program While Watching Another
1
Push VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Display.
2
Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose!
• To switch back and forth between the recording and
viewing channel, push VCR/TV.
Selecting Channels at the VCR
1
Turn your TV and VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn't light, push VCR/TV to turn it on.
2
Use CH
A/T
on the remote control or VCR
to select channels.
• To switch back to TV channel selection, push VCR/TV to
turn VCR indicator off, or simply turn the VCR power off.
17